Cone crusher equipment has become a good assistant in mining enterprises, but the use of cone crusher should also understand some common sense: as an important equipment in the production line of stone material, the cone crusher is more prominent in all aspects. The production and research of the stone production line of our years have summed up some small common sense, these small often Knowledge plays an important role in improving the efficiency and maintenance of cone crushers.   

1, only when the cone crusher starts working normally can material be put into production.           

2, the broken material must be put into the broken chamber evenly, and the material must not be added from the side or the material. This will not cause the single side overload of the equipment or the pressure of overloading.           

3. When the cone crusher works normally, the temperature of the bearing must not exceed 30 degrees, and the maximum temperature should not exceed 70 degrees. If the temperature of the cone crusher exceeds the above temperature during the working period, it is necessary to stop the inspection immediately. After identifying the causes, measures should be taken immediately.           

4, before the cessation of the cone crusher, it is necessary to stop the feed first, and wait for all the materials in the broken cavity to be removed, so that the power can be shut down so that it is not easy to cause the phenomenon of clogging in the broken cavity.           

5. When the crusher works, if the material is too much in the broken cavity, it should stop the work of the crusher immediately. After cleaning up the material, we can run the work again.           

6. After using the cone crusher equipment for a period of time, it must be maintained and maintained to check the stability of the components.